Palsonic TFTV2030D - Manual (Page 25)

DVD Playback Operation
23
Preparation: After connections have been made, turn on the TV and select the relevant video input
before playback.
Disc Loading Steps:
Press the power button on the front panel to turn on the power, the player will search a disc and
play it automatically in DVD mode.
Handing the disc with its printed side outward vertically to the disc tray. (Referring to the below
picture.)
Slightly put the disc into the disc tray.
As disc is automatically taken in the disc tray fully, "Loading" will be highlighted on the liquid
crystal display. And the playback begins. 1.
2.
3.
4.
Warning: Do not play poor quality discs that may damage the player's lens.
DVD Playback
Menu
Normally there is a selecting menu for DVD discs. You can press the MENU button to enter the
menu, and use the direction buttons to highlight an item you would like to select. Press the ENTER
button to select it.
Title & Chapter
Normally there are several titles in a DVD disc, and several chapters (sections) in a title. You can
select any title or chapter quickly by entering the relevant number.
Region Code
DVD players and discs are coded by region. These regional codes must match the played discs. If
the codes don't match, the disc cannot be played. This player's default code is region 4.
Stop
Press this button once to stop playback and then press PLAY button to resume it. Press the button
twice to stop playback completely.
Pause
Press the PAUSE button to pause playback. Press the button twice to start step by step playback.
Disc