Moving the projector, Caution in carrying or transporting the projector, Adjustable feet – Proxima ASA 9260/9240 User Manual

Page 8

Advertising
background image

DOWN

8

Use the carrying handle when moving the projector.
Replace the lens cover and retract the adjustable feet when
moving the projector to prevent damage to the projector.

ADJUSTABLE
FEET

FEET LOCK LATCHES

MOVING THE PROJECTOR

INSTALLATION

CAUTION IN CARRYING OR TRANSPORTING THE PROJECTOR

Do not drop or bump the projector, otherwise damages or malfunctions may result.

When carrying the projector, use a Proxima recommended Carrying Case.

Do not transport the projector by using a courier or transport service in an unsuitable transport case. This may cause
damage to the projector. To transport the projector through a courier or transport service, use a Proxima
recommended Case.

For a carrying or transportation cases, contact a Proxima authorized dealer.

USA

UP

UP

DOWN

Picture tilt and projection angle can be adjusted by rotating the
ADJUSTABLE FEET. Projection angle can be adjusted 0 to 6°.

ADJUSTABLE FEET

Lift the front of the projector and press the FEET LOCK
LATCHES on both sides of the projector.

Release the FEET LOCK LATCHES to lock the ADJUSTABLE
FEET and rotate the ADJUSTABLE FEET to fine tune the
position and the tilt.

To shorten the ADJUSTABLE FEET, lift the front of the
projector and press and undo the FEET LOCK LATCHES.

1.

3.

2.

NOTE: The position and the keystone distortion of the image can

also be adjusted using the KEYSTONE function.

(See pages 28, 35 and 45).

Advertising