Panasonic GU87 - Manual (Page 36)

32 Tools & Set Time Menu
INFRARED
PORT PREPARING AN INFRARED CONNECTION
Transfer data between
your phone and other
devices (that have an
infrared port) using an
infrared connection. A
TV remote control
sends infrared signals
to your TV, VCR, etc. to
control volume or
change channels.
Infrared also enables
you to use GSM fax and
data services, and
provides access to the
Internet and e-mail
through existing
applications.
Note: Downloaded files
with a copyright cannot
be transferred via
infrared.
Place your phone and the other device (with an infrared
port) within the effective infrared range to each other. The
infrared ports must face each other.
Verify that there are no obstructions between the two
communicating devices.
• If the other device is a PC, you must set up the infrared
connection on PC. (For example: Start > Settings >
Control Panel > Infrared > Options tab > Enable Infrared
Communication.)
SENDING IMAGES OR MUSIC DATA FROM YOUR
PHONE
Note: Images and Music data can be transferred only
between GU87 phones.
1. Verify that the infrared ports on both devices are facing
each other, and other device is set to receive data.
2. In the Files & Setup Menu, scroll to Data Files, press
twice, scroll to Picture or Sound, press .
3. Scroll to image or music data to send, press .
4. Scroll to Send IrDA, press .
• To stop the transmission, press .
SENDING YOUR PROFILE DATA FROM YOUR PHONE
1. Verify that the infrared ports on both devices are facing
each other, and other device is set to receive data.
2. In the Phonebook/V-Mail Menu, scroll to Own
Number/Info, press . Scroll to Own Number (SIM)
or Personal Info, press . Scroll to Send IrDA, press
.
SENDING PHONEBOOK OR SCHEDULE DATA FROM
YOUR PHONE
1. Verify that the infrared ports on both devices are facing
each other, and other device is set to receive data.
2. In the Phonebook/V-Mail Menu or the Calendar Menu,
select data to be sent, press , scroll to Send IrDA,
press .
•
If you select data that cannot be forwarded or
saved, your phone displays an error message.
GU87 OI.book Page 32 Tuesday, January 28, 2003 3:00 PM