Pass Labs X1 User Manual
Page 9
9
X1 Owner’s Manual
supply cable does not carry any audio signals or digital clock lines
and is filtered against noise.
Muting relays, which delay connection during turn-on and shut off
the output when insufficient power supply is available to maintain
regulation, guard the output of the X1. The preamplifier is designed
to run constantly, and will exhibit optimum measured performance
within about 10 hours of turn-on. The omission of a power switch is
intentional.
The X1 consists of two full-size aluminum chassis. Both chassis are
machined from solid aluminum stock by computer controlled milling
machines. There are no stamped or sheetmetal products in this
product. One of the full-size chassis houses the control functions,
active elements and display. The second chassis houses the power-
supply.
For more information please contact:
Pass Laboratories Inc.
P.O. Box 219,
24449 Foresthill Rd.,
Foresthill, CA 95631
Tel: 530.367.3690
Fax: 530.369.2193
www.passlabs.com
© 2006 Pass Laboratories Inc.