Disarming diagnostics, System status chirps – Python 871XP User Manual

Page 37

Advertising
background image

34

© 2 0 0 5 d i r e c t e d e l e c t r o n i c s — a l l r i g h t s r e s e r v e d

delay and you arm your security system before the interior light

turns off, you may hear a second Bypass Notification chirp.

Once the light turns off, however, the security system resumes

normal monitoring.

disarming diagnostics

Extra chirps that are heard when disarming the system are the

Tamper Alert. If four chirps are heard when disarming the

system, then the security system was triggered in your absence.

If five chirps are heard when disarming the system, a zone was

triggered so many times that the Nuisance Protection

®

Circuitry

has bypassed that zone. In either case, the in-vehicle status LED

will indicate which zone was involved (see Table of Zones

section). The security system will retain this information in its

memory and chirp four or five times each time it is disarmed,

until the next time that the ignition is turned on.

system status chirps

The siren will chirp when arming/disarming the system. The

pattern of chirps will audibly report the system’s status as

described below.

Advertising