Operating the system, Easy set, Switching the system on – Philips FW-P73 User Manual

Page 15: Switching the system to standby mode, Selecting the source, Selecting the equalizer display, Sound control

Advertising
background image

3139 116 19511 ( ENG)

15

OPERATING THE SYSTEM

To start the demonstration mode
• Press and hold Ç(on the system

only) for five seconds when the
system is in standby mode.
™ The demonstration will begin.

Easy Set

EASY SET allows you to store all
available radio stations automatically.

• Press and hold

STANDBY ON (on

the system only) for five seconds
when the system is in standby or
demonstration mode.
™ “EASY SET” will be displayed,

and followed by “

TUNER” and

then “

AUTO”.

™ EASY SET will start searching for

all radio stations on FM band and
then followed by radio stations on
AM band.

™ All available radio stations with

sufficient signal strength will be
stored. Up to 40 presets may be
stored.

Notes:
– EASY SET will start with the FM band,

if there are still presets available, the
system will continue to store the AM
band.

– When EASY SET is used, all previously

stored radio stations will be replaced.

– The last preset radio station will

appear on the display when EASY SET
is completed.

Switching the system ON

• Press

CD, TUNER, TAPE or AUX.

You can also switch on the system by
pressing any one of the CD DIRECT
PLAY buttons.

Switching the system to
standby mode

• Press

STANDBY ON or B on

the remote control.
™ The system will switch to standby

mode.

Selecting the Source

• Press the respective source selection

button:

CD, TUNER, TAPE or

AUX.
™ The display indicates the selected

source.

Note:
– For an external source, make sure you

have connected the audio left and right
OUT terminals of the external
equipment (TV, VCR, Laser Disc player,
DVD player or CD Recorder) to the
AUX IN terminals.

Selecting the Equalizer
Display

You can select the desired equalizer
display for the system. You must not
press the DSC button on the system
before using the SOUND

3 or 4

controls.

• Press the

SOUND

3 or 4 to select

the desired Equalizer Display,
NORMAL, TOP DOWN, or NITE
MODE.
™ The selected display will be

shown.

NORMAL Display

FRONT

FM

STEREO

BACK

HSD

REPEAT

REC

LW

MW

AM

T.A.

NEWS

TIMER

60Hz

500Hz

250Hz

1KHz

2KHz

4KHz

8KHz

PROGRAM

TOP DOWN Display

FRONT

FM

STEREO

BACK

HSD

REPEAT

REC

LW

MW

AM

T.A.

NEWS

TIMER

60Hz

500Hz

250Hz

1KHz

2KHz

4KHz

8KHz

PROGRAM

NITE MODE Display

60Hz

500Hz

250Hz

1KHz

2KHz

4KHz

8KHz

FRONT

FM

STEREO

BACK

HSD

REPEAT

REC

LW

MW

AM

T.A.

NEWS

TIMER

PROGRAM

Note:
– In NITE MODE, all lights will be

switched off and the display brightness
will be dimmed.

Sound Control

VOLUME ADJUSTMENT
Adjust

VOLUME to increase or

decrease the sound level.

For Personal Listening
Connect the headphones plug to the
n socket at the front of the system.
The speakers will be muted.

DIGITAL SOUND CONTROL
(DSC)
The DSC feature enables you to adjust
the system to suit your type of music.

• Press

DIGITAL SOUND

CONTROL (DSC) to select
OPTIMAL, CLASSIC, TECHNO,
JAZZ, ROCK or VOCAL.
™ The selected digital sound is

encircled.

™ “OPTIMAL X, CLASSIC,

TECHNO X, JAZZ X, ROCK
X or VOCAL X” will be
displayed. "

X" is the pre-selected

level.

Advertising
This manual is related to the following products: