Video output settings – Pioneer DV-410V-S EN User Manual

Page 36

Advertising
background image

08

36

En

Video Output settings

Dolby Digital Out

Dolby Digital

Dolby Digital encoded digital audio is output when
playing a Dolby Digital DVD disc.

Dolby Digital > PCM

Dolby Digital audio is converted to PCM audio
before being output.

DTS Out

DTS

DTS encoded digital audio is output when playing a
DTS disc. (Noise will be output if your amplifier/
receiver is not compatible with DTS audio.)

DTS > PCM
(for DV-410V)

No digital audio is output when playing a DTS
disc.DTS audio is converted to PCM audio before
being output.

Off

No digital audio is output when playing a DTS disc.

96kHz PCM Out

96kHz > 48kHz

96 kHz digital audio is converted to 48 kHz for
digital output.

96kHz

96 kHz digital audio is output as is at 96 kHz.

MPEG Out

MPEG

MPEG encoded digital audio is output as is.

MPEG > PCM

MPEG encoded digital audio is converted to PCM
audio for digital output.

Setting

Option

What it means

TV Screen
(This setting effective
for analog and HDMI
video output. See also
Screen sizes and disc
formats on page 43.)

4:3 (Letter Box)

Set if you have a conventional 4:3 TV. Widescreen
movies are shown with black bars top and bottom.

4:3 (Pan & Scan)

Set if you have a conventional 4:3 TV. Widescreen
movies are shown with the sides cropped so that
the image fills the screen.

16:9 (Wide)

Set if you have a widescreen TV.

16:9 (Compressed)
(DV-410V only)

Can be selected when you are connected via
HDMI, and have the

HDMI Resolution set to

1920x1080p, 1920x1080i or 1280x720p. Video in
4:3 can be properly displayed on a 16:9 high
definition television (with black bars shown on
either side of the screen).

Component Out

Progressive

Set if your TV is compatible with progressive scan
video (see your TV’s instruction manual for details).
The

PRGSVE indicator lights in the front panel

display. See also Switching the video output to
interlace using the front panel controls
on page 12.
Note that progressive scan video is only output from
the component video jacks.

Interlace

Set if your TV is not compatible with progressive
scan video.

Setting

Option

What it means

DV510K_IBD_EN.book 36 ページ 2008年3月28日 金曜日 午前11時54分

Advertising
This manual is related to the following products: