Palm Voice Memo Handbook - Manual (Page 7)

Recording a voice memo
3
Recording a voice memo
To record a voice memo, you can use the headset button or the onscreen controls.
After you finish recording a voice memo, you cannot add to or change the content,
but you can assign the voice memo to a category or change the voice memo title.
To record a voice memo on your handheld using the headset button:
1. Connect the headset to your handheld. This will automatically open the Voice
Memo application.
2. To begin recording, press the headset button and begin speaking into the
headset microphone.
A tone sounds to indicate that recording has started.
NOTE If you are recording a long voice memo and want to pause and continue
it later, see “Pausing and resuming a voice memo recording” in the next
section.
3. To stop recording, press the headset button once.
A tone sounds to indicate that recording has stopped.
4. (Optional) Tap the time at the top of the screen and enter a title.
Headset button