Pioneer Super Tuner III D AVH-P5950DVD - Manual (Page 5)

English
Français
Italiano
Nederlands
PyÒÒÍËÈ
4
ENG/MASTER 96 INST
<CRD4215-A> 5
iPod with Dock
Connector
Dock connector
Interface cable (e.g., CD-I200)
(sold separately)
2 m
Connection method
1. Clamp the lead. 2. Clamp firmly with
needle-nosed pliers.
Note:
• The position of the parking brake switch depends on the vehicle model. For details,
consult the vehicle Owner’s Manual or dealer.
Yellow/black
If you use equipment with Mute function, wire this lead to
the Audio Mute lead on that piece of equipment. If not,
keep the Audio Mute lead free of any connections.
Light green
Used to detect the ON/OFF status of the parking brake. This
lead must be connected to the power supply side of the parking
brake switch.
Blue/white
Connect to system control terminal of the power
amp or auto-antenna relay control terminal
(max. 300 mA 12 V DC).
Ground side
Power supply side
Parking brake
switch
When you connect the separately sold multi-
channel processor (e.g., DEQ-P7650) to this
unit, do not connect anything to the speaker
leads and system remote control
(blue/white).
Dock connector port
Gray
AUX jack (3.5 ø)
20 cm
Use a mini plug cable to
connect with auxiliary
equipment.
With a 2 speaker system, do not connect
anything to the speaker leads that are not
connected to speakers.
Note:
• Change the initial setting of this unit (refer to the
Operation Manual). The subwoofer output of this unit
is monaural.