Polaroid P100 - Manual (Page 14)

7
3. Load ribbon onto the supply spindle
(under print head carriage) and empty
core (with tape attached) onto the
take-up spindle. Make sure the ribbon
comes off the top of the supply spindle
and feeds to the top of the take-up spindle.
4. Push down on the Print Head Lock
Lever until an audible 'click' signals the
locked-down position.
Please note that the ribbon automatically
synchronizes whenever the print head lock down
occurs.
5. Close Cover.
SUPPLY SPINDLE
TAKE UP SPINDLE
`CLICK'
OPERATION
The card flipper will not operate and an error will
be indicated if you try to flip a card when the cover
is open.