Polaroid FLM-4232HM - Manual (Page 24)

www.polaroid.com 24
(3) Remove 4 EMI Foam Standoffs (A) and EMI Aluminum Foil Shielding Tape (B).
NOTE: You MUST re-install the EMI Foam Standoffs and EMI Aluminum Foil Shielding
Tape when reassembling the TV.
(4) From the D-sub board, remove the Speaker wires, Front/Side Control Button wire, LCD Panel wire, and A/V wire.
(5) Remove the black tape from the Speaker wire and Ceramic ring (PIC2) and SAVE for reassembly.
B
A
Speaker Wire Front/Side Control Button A/V Wire
D-sub board
Black Tape
LCD Panel Wire