Profile MP6600 - Manual (Page 8)

7
M
OUNTING THE CD/MP3 PLAYER
There are two different ways to mount the CD / MP3 Player. In most Japanese vehicles you
can use the factory mounting brackets, taking advantage of the ISO/DIN opening. If your
vehicle does not have ISO/DIN opening, you can mount the CD/MP3 Player using the supplied
DIN sleeve and rear support bracket. When considering your mounting location, make sure the
unit will be level. If you cannot mount the CD/MP3 Player level, due to your vehicle’s design,
make sure there is no more than a 30 degree tilt. Keeping this in mind will assure proper
CD/MP3 play and overall reliability.
DIN SLEEVE MOUNTING
Insert the mounting sleeve into a
standard DIN cutout in the dash
kit, dashboard or Console.
Bend the mounting tabs of the sleeve
with a screwdriver to secure the bracket
firmly in place.
Insert the CD/MP3 Player in the
mounting sleeve until it locks.