Powerware Horsepower Computer System ST-2400S - Manual (Page 10)

recording can be controlled from the 2400S horsepower computer
and / or using the personal computer’s keyboard or mouse.
Recorded data can be printed on the PC’s printer and / or can be
easily “imported” into Microsoft Excel (or other analysis
programs) for further operations such as graphing, etc.
Dyno32 is compatible with most Windows based computer
systems including Win95, Win98, WinMe, Win2000 and WinXP.
Data Recording and Graphing Software for the 2400S:
DynoGraph software combines most of the features of Dyno32
with a “built-in” storage, printing, and graphing capability to
streamline the computerization of your dynamometer system.
The DynoGraph software integrates the important Dyno data
collection, display, storage, and printing functions into one easy to
use program that helps you to maintain complete records of the
measurements you take using your dynamometer system. It also
creates professional reports of your measurements including
graphs of the important parameters such as Torque vs. RPM,
Power vs. RPM, etc
Up to 100 measurement “points” can be included in one
DynoGraph document. There is provision to include your
company info (name, address, etc.) along with the important
information about the device being measured (customer info,
machine info, date and time of the measurements, etc.)
DynoGraph software is compatible with most Windows computer
systems including Win95, Win98, WinMe, Win2000 and WinXP.
Calibration:
The calibration of the Model 2400S horsepower computer should be
checked at least once per year – or sooner if any doubts or questions arise
as to whether the readings produced by the unit are within the accuracy
specifications of the unit.
The Model 2400S should also have its calibration checked if any of the
following events occur:
1.) The instrument has been dropped or otherwise mistreated.
10