Polycom HDX Systems - Manual (Page 20)

U SER ’ S G UIDE FOR P OLYCOM HDX S YSTEMS
WWW . POLYCOM . COM / VIDEODOCUMENTATION
16
To start showing content:
1. Make sure the computer is connected and powered on.
You can connect a computer to video input 4 or 5. When you connect to
video input 4, you can also connect to audio input 4 to share sound
from your computer, as shown in the following figure.
2. Press Content on the remote control or press Camera and
select the computer input.
Audio from input 4 is muted unless video input 4 is selected as a video
source.
To stop showing content:
¾ Press Content on the remote control or press Camera and select
the main camera.
Showing Content from a Document Camera, VCR, or DVD Player
All Polycom HDX systems enable you to show different types of information to
other sites in a call, such as through a document camera, VCR, or DVD player.
Before the call begins:
1. Make sure the document camera, VCR, or DVD player is connected and
powered on. Refer to the setup sheet that came with your system.
2. Position your document or object in the document camera or insert the
videotape or DVD.
To start showing a document, object, videotape, or DVD in a call:
1. Press Camera on the remote control.
2. Select a video source.
3. Press on the remote control.