Introduction of advanced tuner, Operation 12, Storing and recalling broadcast – Pioneer DEH-P7500MP User Manual

Page 12: Frequencies 12, Tuning in strong signals 12, Introduction of advanced tuner operation, Storing and recalling broadcast frequencies, Tuning in strong signals, Tuner

Advertising
background image

Introduction of advanced

tuner operation

1

1 Function display

Shows the function status.

% Press FUNCTION to displaythe function

names.

Press FUNCTION repeatedly to switch be-

tween the following functions:

BSM (best stations memory)Regional (re-

gional)Local (local seek tuning)program

type selection (PTY)TA (traffic announce-

ment standby)AF (alternative frequencies

search)News (news program interruption)

# To return to the frequency display, press
BAND.
# If MW/LW band is selected, you can only se-
lect BSM or Local.

Note

If you do not operate the function within about 30
seconds, the display is automatically returned to
the frequency display.

Storing and recalling

broadcast frequencies

If you press any of the preset tuning buttons

16 you can easily store up to six broadcast

frequencies for later recall with the touch of a

button.

% When you find a frequency that you

want to store in memorypress a preset

tuning button 16 and hold until the preset

number stops flashing.

The number you have pressed will flash in the

preset number indicator and then remain lit.

The selected radio station frequency has been

stored in memory.

The next time you press the same preset tun-

ing button 16 the radio station frequency is

recalled from memory.

Notes

! Up to 18 FM stations, 6 for each of the three

FM bands, and 6 MW/LW stations can be
stored in memory.

! You can also use a and b to recall radio sta-

tion frequencies assigned to preset tuning
buttons 16.

Tuning in strong signals

Local seek tuning lets you tune in only those

radio stations with sufficiently strong signals

for good reception.

1 Press FUNCTION to select Local.

Press FUNCTION until Local appears in the

display.

2 Press a to turn local seek tuning on.

Local seek sensitivity (e.g., Local 2) appears in

the display.

3 Press c or d to set the sensitivity.

There are four levels of sensitivity for FM and

two levels for MW/LW:

FM: Local 1Local 2Local 3Local 4

MW/LW: Local 1Local 2

The Local 4 setting allows reception of only

the strongest stations, while lower settings let

you receive progressively weaker stations.

Tuner

En

12

Section

04

Advertising