Porter-Cable XX55 - Manual (Page 11)

• 1/3 HP, 1 phase, 115V motor
• Belt speed: 3,000 FPM
• Disc speed: 1,725 RPM
• Tilting tables for belt and disc
• 1-1/2” dust chute outlet
• Includes miter gauge
• Weight: 68 lbs.
12
Check us out on the web!
www.redmondmachinery.com
D
ELTA
- F
ACTORY
R
ECONDITIONED
• 3 HP, 1 phase, 220V motor
• One 12” x 35-3/8” table
• Platen tilting: 0 to 90°
• End sanding table allows for
curved sanding
• Belt speed: 3,150 FPM
• 3/4” belt oscillation
• 4” dust chute outlet
• Includes sanding drum kit with 1-
1/2”, 2” and 3” x 4” long sanding
drums & miter gauge
• Weight: 500 lbs.
Delta 6” x 108” Oscillating Horizontal Edge
Sander
#31-396R ( Factory Reconditioned ) ...............................$1,489.00
Delta 13-Spindle Single Row Line Drill
• 3/4 HP, 1 phase, 115V motor
• 32mm spindle centers
• (1) 13-spindle drill head
• 7-right hand & 6-left hand, 10mm fixed collets
• Top-down drilling for easy visibility
• Manually operated
• Panel indexing pins
• 30” back fence with (2) stops
• Telescoping handle extends
from 16” to 23” for increased
leverage
• Tooling not included
• Weight: 108 lbs.
* Shown with optional
stand and tooling
#32-325R ( Factory Reconditioned ) ......$889.00
• 1/4” to 1/2” chisel capacity
• 5/8” chisel shank capacity
• 5” maximum chisel stroke
• 13-1/2” x 16-1/4” table size
• 3/8” chuck capacity
• Spindle speed: 1725 RPM
• 1/2 HP, 1 phase, 120V motor
• Weight: 55 lbs.
Delta Hollow Chisel Mortiser
#14-651R ( Factory Reconditioned ) ......$219.00
Delta 16-1/2” 16-Speed Floor
Model Drill Press
• 3/4 HP, 1 phase, 115/230V motor
• Speed range: 215 to 2,720 RPM
• 5/8” chuck size
• 4-7/8” spindle travel
• 14” x 14” table
• Weight: 206 lbs
#17-965R ( Factory Reconditioned ) ......$319.00
• 3/4 HP, 1 phase, 120/240V motor
• Variable speed range: 200 to 2,500 RPM
• 1/2” chuck size
• 6” spindle travel
• 14 x 14” table
• Includes Work lamp and tool tray
• Weight: 230 lbs.
Delta 16-1/2” VS Floor Model
Drill Press
#17-968R ( Factory Reconditioned ) ......$399.00
Delta X 5 18-36” Single Drum Sander
• 1-1/2 HP, 1 phase, 120V main motor
• Variable speed conveyor motor (1 to 12
FPM)
• One 18” drum
• Maximum sanding width: 36” (in two pass-
es)
• One 4” dust hood outlet
• Power take-off spindle accommodates acces-
sory pneumatic drums for contour sanding
• Includes 5 - 80 grit sanding wraps, 4 - 120
grit sanding wraps and steel stand
• Weight: 190 lbs.
#31-255XR ( Factory Reconditioned ) ..$699.00*
• 3/4 HP, 1 phase, 120/240V motor
• Two variable speed ranges:
150 to 1,100 RPM
500 to 3,200 RPM
• 1/2” chuck size
• 6” spindle travel
• 14 x 14” table
• Weight: 230 lbs.
Delta 16-1/2” VS Floor Model
Drill Press
#17-925R ( Factory Reconditioned ).....$659.00*
#SA180R ( Factory Reconditioned ) .....................................$88.00
Delta Shopmaster 1” x 42” Belt
& 8” Disc Sander