Pioneer DEH-P4400R EN - Manual (Page 42)

10
Section
Understanding built-in CD player
error messages
When problems occur during CD play an error
message may appear on the display. If an error
message appears on the display refer to the
table below to see what the problem is and the
suggested method of correcting the problem. If
the error cannot be corrected, contact your
dealer or your nearest Pioneer Service Center.
Message
En 42
Additional Information
Message Cause Action
ERROR-11, 12,
17, 30 Dirty disc Clean disc.
ERROR-11, 12,
17, 30 Scratched disc Replace disc.
ERROR-14 Blank disc Check the disc.
ERROR-10, 11,
12, 14, 17, 30,
A0 Electrical or
mechanical Turn the ignition
ON and OFF, or
switch to a
different source,
then back to the
CD player.
ERROR-44 All tracks are
skip tracks Replace disc.
HEAT CD player over-
heated Turn off the CD
player until the
CD player cools
down.