Polaroid Direct Connect Adapter - Manual (Page 19)

21
To print ... Then ...
Note: You can cancel printing by pressing the Picture
Select/Cancel Print button.
If pictures do not appear on the camera LCD
Some digital cameras cannot display pictures on their
LCD screen while connected to the Direct Connect
adapter. If your camera does not display pictures while
connected, use these steps to print a single picture:
1 Disconnect the Direct Connect cable from the camera.
2 Set the camera to the Review mode.
Your camera may have a different name for this mode.
See the camera instructions.
3 Display the picture you want to print.
4 Reconnect the Direct Connect cable to the camera.
5 Set the camera to the PC Connect mode.
6 Press the Single Print button.
all pictures
stored in camera Press the Print All button.
index print(s) Press the Print Index button.