Pioneer HTZ180DVD - Manual (Page 20)

Getting started 04
20
En
You can play a PBC Video CD/Super VCD
without having to navigate the PBC menu by
starting playback using a number button to
select a track, rather than the
 (play) button.
Listening to the radio
The tuner can receive both FM and AM
broadcasts, and lets you memorize your
favorite stations so you don’t have to manually
tune in every time you want to listen.
1 Press TUNER to switch to the tuner, then
press repeatedly to select the AM or FM band.
The display shows the band and frequency.
2 Tune to a frequency.
There are three tuning modes — manual, auto,
and high-speed:
• Manual tuning: Press TUNE repeatedly to
change the displayed frequency.
• Auto tuning: Press and hold TUNE until
the frequency display starts to move, then
release. The tuner will stop on the next
station it finds. Repeat to keep searching.
• High-speed tuning: Press and hold
TUNE until the frequency display starts to
move rapidly. Keep the button held down
until you reach the frequency you want. If
necessary, fine tune the frequency using
the manual tuning method.
Improving poor FM reception
If you’re listening to an FM station in stereo but
the reception is weak, you can improve the
sound quality by switching to mono.
1 Tune to an FM radio station then press
SHIFT+SETUP.
2 Use
/ to choose TUNERSET then press
ENTER.
3 Use
/ to choose FM MODE then press
ENTER.
4 Use
/ to select FM MONO then press
ENTER.
The mono indicator (
) lights when the tuner
is in mono reception mode.
Select FM AUTO above to switch back to auto-
stereo mode (the stereo indicator ( ) lights
when receiving a stereo broadcast).
Reducing AM reception noise
If AM reception seems particularly poor, or the
AM radio station you’re listening to seems
noisy, try using the Noise Cut feature for better
sound quality.
1 Tune to an AM radio station then press
SHIFT+SETUP.
2 Use
/ to choose TUNERSET then
press ENTER.
3 Use
/ to choose NOISECUT then press
ENTER.
4 Use
/ to select the noise cut mode
then press ENTER.
Select an effect level between 1 or 2.
Memorizing stations
This system can memorize up to 30 stations,
stored in three banks, or classes (A, B and C) of
10 stations each.
1 Tune to an AM or FM radio station.
For the FM band, select mono or auto-stereo
reception as necessary. This setting is saved
along with the preset.
2 Press SHIFT+T.EDIT.
3 Press CLASS to select one of the three
classes, then use the PRESET buttons to select
the station preset you want.
You can also use the number buttons to select
a preset.
Button What it does
RETURN Displays the PBC menu.
Numbers Selects numbered menu options.
Press
ENTER
to select.
 Displays the previous menu page
(if there is one).
 Displays the next menu page
(if there is one).
HTZ180_181_280_282DVD_En.book 20 ページ ２００９年３月１３日 金曜日 午後２時５０分