Pioneer VSX-917V-S/-K - Manual (Page 48)

Using the tuner 08
48
En
5 If you want to keep listening to the
station, press ENTER within the 5 seconds.
If you don’t press
ENTER, searching resumes.
If NO PTY is displayed it means the tuner
couldn’t find that program type at the time of
the search. 1
Using EON
When EON (Enhanced Other Network
information) is turned on, the receiver jumps to
an EON-linked broadcast when it begins, even
if a receiver function other than the tuner is
being used. It can’t be used in areas that EON
information isn’t transmitted and when FM
broadcast stations don’t transmit PTY data.
When the broadcast ends, the tuner returns to
the original frequency or function.
1 Press the FM button to select the FM
band.
2
2 Press EON to select one of the possible
modes.
Press repeatedly to switch between:
• EON TA (Traffic Announcement) – Sets the
tuner to pick up traffic information when it
is broadcast.
• EON NEWS – Sets the tuner to pick up
news when it is broadcast.
• OFF – Switches off the EON feature.
When set to TA or NEWS, the EON indicator in
the display lights (it flashes when receiving an
EON broadcast). 3 The indicator in the
display lights when the current station carries
the EON service. 4
Note
1 RDS searches station presets only. If no stations have been preset, or if the program type could not be found among the station
presets
NO PTY is displayed. FINISH means the search is complete.
2 EON is only possible in the FM band.
3 You can’t search for traffic announcements and news at the same time.
4 • You cannot operate the
TUNER EDIT and PTY SEARCH buttons while the EON indicator in the display is lit.
• If you want to change to a function other than the tuner when the EON indicator is flashing, press EON to turn EON off.
VSX-917V.book.fm Page 48 Wednesday, December 20, 2006 3:04 PM