Planet Technology 200Mbps Powerline Ethernet Bridge PL-501-EU/US/UK - Manual (Page 7)


Connecting Powerline Ethernet Bridge
Hardware Installation
Setp 1.
Connect one Powerline
Ethernet bridge to your
ADSL or Cable modem’s
Ethernet port.
Setp 2.
Plug it into the nearest
power socket.
Setp 3.
Plug in the second
Powerline Ethernet
bridge next to your PC
and connect the Ethernet
ports.
Setp 4.
Internet access from any
power socket in your
home.
Utility Installation for Windows
The installation procedure for the Powerline Configuration utility
will vary depending on which operating system you are using on
your computer. The following procedure is for installation under
Windows XP. Installation on other operation system is similar.