Peavey PV 10 - Manual (Page 14)

14
P PV V ® 1 10 0 & & P PV V ® 1 14 4 C Co om mp pa ac ctt C Co on ns so olle e
S SP PE EC CIIFFIIC CA AT TIIO ON NS S
Function
Microphone
(150 Ohms)
Line (10 k Ohms)
Stereo Line Input
Tape
Input Z
(Ohms min)
2.2 k
10 k
10 k
10 k
Input Gain
Setting
Max Gain
(60 dB)
Min Gain
(10 dB)
Max Gain
(40 dB)
Min Gain
(-10 dB)
Max Gain
(20 dB)
Nominal
N/A
(10 dB)
Nominal*
-56 dBu
-4 dBu
-36 dBu
+14 dBu
-16 dBu
-1 dBu
-10 dBV
Max
-38 dBu
+14 dBu
-18 dBu
+32 dBu
+2 dBu
+17 dBu
+12 dBu
Bal/Unbal
Bal
Bal
Unbal
Unbal
Connector
XLR Pin 1 Gnd
Pin 2 (+)‚ Pin 3 (-)
1 ⁄ 4" TRS; Tip (+)‚
Ring (-)‚ Sleeve
Ground
1 ⁄
4"
TS; Tip (+)‚
Sleeve Ground
RCA Phono
Input Levels
Min**
-76 dBu
-24 dBu
-56 dBu
-10 dBu
-36 dBu
-21 dBu
-17 dBu
Function
Main Left/Right
Effects and
Monitor Sends
Control Room
Headphone
Tape
Min Load Z
(Ohms)
600
600
600
8
2.2 k
Nominal
+4 dBu
+4 dBu
+4 dBu
+4 dBu (no load)
+4 dBu
Max
+22 dBu
+22 dBu
+22 dBu
+22 dBu
+22 dBu
Bal/Unbal
Bal
Bal
Bal
Unbal
Unbal
Connector
XLR Pin Ground Tip
Pin 2 (+), Pin 3 (-)
1 ⁄
4"
TRS: Tip (+), Ring (-),
Sleeve Ground
1 ⁄
4"
TRS, Tip (+)‚ Ring (-)
Sleeve Ground
1 ⁄
4"
TRS, Tip (+)‚ Ring (-)
Sleeve Ground
1 ⁄
4"
TRS; Tip Left‚ Ring Right‚
Sleeve Ground
RCA Phono
Output Level
0 dBu = 0.775 V (RMS)
** Min Input Level (sensitivity) is the smallest signal that will produce nominal output (+4 dBu) with channel and master faders set for
maximum gain.
* Nominal settings are defined as all controls set at 0 dB (or 50% rotation for rotary pots) except the gain adjustment pot which is as
specified.
0 dBu = 0.775 V (RMS)
Inputs
Outputs
Gain
Mic Input Gain Adjustment Range: 10 dB to 60 dB
Mic Input to Left/Right Balance Output 88 dB (max gain)
Line Input Gain Adjustment Range: -10 dB to 40 dB
Line Input to Left/Right Balance Output 60 dB (max gain)
Stereo Line Input Gain Adjustment Range: Off to +20 dB
Stereo Line Input to Left/Right Output 40 dB (max gain)