Connecting the input/ output terminals, Front panel, Rear panel – Pioneer DDJ-T1 User Manual

Page 14: 2aux/ mic selector switch, 3vol control, 4mic jack

Advertising
background image

14

DRB1536-A

En

14

Front panel

PHONES

INPUT SELECT

VOL

MIC

AUX

MIN

MAX

MIC

2 3 4

1

1

PHONES terminal

Connect headphones here.
Both stereo phone plugs (Ø 6.3 mm) and stereo mini phone plugs (Ø
3.5 mm) can be used.

! The volume decreases when headphones are connected simulta-

neously to both the stereo phone jack and the stereo mini phone
jack.

2

AUX/ MIC selector switch

Switches the audio input between the external device and the
microphone.

— [AUX]: The external device connected to the [AUX] terminals is

selected.

— [MIC]: The microphone connected to the [MIC] terminal is

selected.

3

VOL control

Adjusts the audio level input to the [MIC] terminal.

4

MIC jack

Connect a microphone here.

! This cannot be used when operating on USB bus power.

Connecting the input/ output terminals

Rear panel

MASTER OUT 2

MASTER

OUT 1

(TRS)

AUX IN

VOL

USB

ON

OFF

DC IN

MIN

L

R

L

L

R

R

MAX

R L

R L

To audio input

terminals

Portable audio device

TRAKTOR

Computer

Component, amplifier,

powered speaker, etc.

To audio

output terminals

To power outlet

AC adapter

(included)

 Cord hook

Hook the AC adapter’s power cord in the top of the cord
hook, the USB cable in the bottom.

Fasten the AC adapter’s power cord and USB cable in place by hooking
them on the cord hook. This prevents the power cord and USB cable from
being accidentally pulled and the plugs from being disconnected from
the terminals.

! The sound will be interrupted if the AC adapter or USB cable is

disconnected during playback.

AC adapter’s power cord

Cord hook

USB

ON

OFF

DC IN

USB cable

Front panel

PHONES

INPUT SELECT

VOL

MIC

AUX

MIN

MAX

MIC

Headphones cord

To headphones

Microphone

Microphone cable

Headphones

To microphone

Advertising