Specifications pro 810 – Peavey Pro 810 User Manual
Page 2
SPECIFICATIONS Pro 810
™
the high frequency output to
accomodate any playing style. A
protection circuit in the crossover
helps prevent damage to the horn
tweeter in the event of overpowering.
Please note that this protection circuit
is for long-term (average signal level)
protection. It is still possible for
transients (short-term peaks) to
damage the horn.
The Pro 810 is a 4 Ohm enclosure
capable of handling an input power of
up to 2,800 Watts program.
P
Po
ow
we
err h
ha
an
nd
dlliin
ng
g::
Peavey Electronics rates this unit’s
system power handling using a
modified form of the AES standard
2-1984, utilizing audio band limited
(20 Hz to 20 kHz) pink noise with
peaks over four times the RMS level.
This strenuous test signal assures the
users that every portion of this system
can withstand today’s high technology
music. The test signal contains large
amounts of very low frequency energy,
effectively simulating the frequency
content of live music situations. The
full measure of high frequencies in the
test signal allows for exposure of the
speaker system to synthesized tones
that may extend audibility. This rating
is contingent upon having a minimum
of 3 dB amplifier headroom available
to ensure that clipping does not occur.
3
3 +
+ 2
2 Y
YE
EA
AR
R L
LIIM
MIIT
TE
ED
D W
WA
AR
RR
RA
AN
NT
TY
Y
N
NO
OT
TE
E:: For details, refer to the
warranty statement. Copies of this
statement may be obtained by
contacting Peavey Electronics
Corporation, P.O. Box 2898,
Meridian, Mississippi 39301-2898.
Features and specifications subject to change without notice.
Peavey Electronics Corporation • 711 A Street • Meridian • MS • 39301 (601) 483-5365 • FAX (601) 486-1278 • www.peavey.com
©2002 Printed in the U.S.A. 10/02
80305055
Listen To This
™