Paradyne 6371 - Manual (Page 97)

A. Command Line Interface
6300-A2-GB20-00 March 2002 A-25
show dhcp relay
Minimum Access Level: Operator
Command Mode: Standard
Displays the DHCP relay agent’s current status and configuration.
Sample show dhcp relay display:
DHCP relay – { enabled | disabled }
DHCP relay – server ip-addr: x.x.x.x
Maximum number of DHCP relay clients: xxx
show dhcp server
Minimum Access Level: Operator
Command Mode: Standard
Displays the DHCP relay’s current status and configuration.
Sample show dhcp server display:
DHCP server { enabled | disabled }
DHCP server – router ip-addr: x.x.x.x
DHCP server – name: domain name.com
DHCP server – nameserver ip-addr: x.x.x.x
DHCP server – address range:lower ip-addr x.x.x.x
upper ip-addr x.x.x.x
DHCP server – subnet mask: x.x.x.x
DHCP server – leasetime:minimum xxxx minutes
maximum xxxx minutes
DHCP server bindings:
ip-addr MAC addr Leasetime (min.)
x.x.x.x xx:xx:xx:xx:xx:xx nnnn
Table A-17. Show Commands (3 of 10)