Dhcp mib, C-19 – Paradyne 6371 User Manual
Page 129
C. Traps and MIBs
6300-A2-GB20-00
March 2002
C-19
DHCP MIB
The supported objects in the DHCP Server/Relay MIB, pdn_dhcp.mib, facilitates
the creation and configuration of DHCP server table entries. The following groups
are supported:
T
DHCP Server Configuration Group – Fully supported. One object is
clarified below:
— dhcpServerRouterIpAddr
(dhcpserv 7) – Enables you to configure the
router IP address used by the DHCP server. This address is provided to
clients in the DHCP reply message from the DHCP server. If this value is
not set, the accepted value is 0.0.0.0.
T
DHCP Binding Group – Facilitates the display of DHCP bindings. This group
is fully supported.
T
DHCP Relay Group – Facilitates the display of DHCP Relay. This group is
fully supported. The following clarifies some of the DHCP Relay objects:
— dhcpRelayIpAddr
(xdslDhcpRelayAgent 6) – This is the IP address of
DHCP server.
— dhcpRelayEnable
(xdslDhcpRelayAgent 7) – Use to enable or disable the
DHCP relay agent.
— dhcpRelayMaxClients
(xdslDhcpRelayAgent 8) – Enables user to specify
the number of clients allowed to request IP address assignments from the
server.