2 ide setup – Panasonic 5500 User Manual
Page 50
Advertising
2.2.2 IDE Setup
2.2.2.1
Configure Outbound attributes to deny ERS8600 CLI commands
Using the same base configuration from the previous step, we will simple add the CLI commands
we wish to deny to the read-write user. In this example, this will apply only to the user
.
IDE Step 1 – IDE already has the vendor specific attributes defined, Bay Networks vendor
code 1584 using attribute types 194 and 195 for the ERS8600 which can be viewed by
going to
IDE Step 2 – Go to
___________________________________________________________________________________________________________________________
49
Advertising