Assigning preset numbers 34, Making a call by entering phone, Number – Pioneer DEH-P65BT User Manual
Page 34: Operating this unit, Assigning preset numbers, Making a call by entering phone number
Calling a number from the Call History
1
Display the list and select a phone num-
ber.
Display the phone number you want to make a
call.
Refer to Displaying the Call History on the pre-
vious page.
2
Press MULTI-CONTROL to make a call.
While calling,
DIALLING is flashing.
3
To end the call, press PHONE.
The estimated call time appears in the display
(this may differ slightly from the actual call
time).
Calling an international number
from the Call History
When calling an international number stored
in the Call History, proceed the country code
with a
+.
1
Display the phone number you want to
make an international call.
Refer to Switching the display on the previous
page.
2
Press MULTI-CONTROL and hold to add
+.
# To delete +, press MULTI-CONTROL and hold
again.
3
Press MULTI-CONTROL to make a call.
While calling,
DIALLING is flashing.
4
To end the call, press PHONE.
The estimated call time appears in the display
(this may differ slightly from the actual call
time).
Assigning preset numbers
Important
To perform this operation, be sure to park your ve-
hicle and apply the parking brake.
Numbers that you dial frequently can be as-
signed to presets for quick recall.
1
Select a desired phone number from
the Phone Book or the Call History.
To select a desired phone number from the
Phone Book or the Call History, see the in-
structions explained in previous pages.
2
Press one of preset buttons 1 to 6 and
hold until the beep sounds.
The selected phone number has been stored
in memory. The next time you press the same
preset button, the phone number is recalled
from memory.
Making a call by entering
phone number
Important
To perform this operation, be sure to park your ve-
hicle and apply the parking brake.
1
Use MULTI-CONTROL to select
NUMBER DIAL in the function menu.
# You can also press DIRECT on the optional re-
mote control to enter in this menu from the
standby display.
2
Push MULTI-CONTROL up or down to
select a number.
# You can also input numbers by pressing 0 to 9
on the optional remote control.
3
Push MULTI-CONTROL left or right to
move the cursor to the previous or next po-
sition.
# Up to 24 digits can be entered.
4
When you completed entering the
number, press MULTI-CONTROL.
5
Press MULTI-CONTROL again to make a
call.
6
To end the call, press PHONE.
Operating this unit
En
34
Section
02