Panasonic P2HD AG-HPG20 - Manual (Page 2)

70
Basic operations on the setting menus
1
Hold down [POWER] for at least 2 seconds
to turn the power on.
2
Press [MODE] to switch to the thumbnail
display off screen.
106 mn 1 2
HD720P
60
1 C H 2 C H
3
Press [MENU] to display the menu.
Example:
MAIN MENU
PUSH MENU TO EXIT
1 .
SW MODE 2 .
RECORDING SETUP
3 . PLAYBACK FUNCTIONS
4 . AV OUT SETUP
5 . DISPLAY SETUP
6 . CARD FUNCTIONS
7 . OTHER FUNCTIONS
4
Using [STOP] and [PLAY], move the
highlighting to the function to be set.
5
Press [STILL] to display the setting item.
Example:
RECORDING SETUP
PUSH MENU TO RETURN
TCG
TC PRESET
1394 UB REGEN
1394 TC REGEN
TC MODE
UB MODE
REC RUN
ON
FRM.RATE
SD(480i/576) MODE
SYS FORMAT
720P/60P
1080i/60i
720P/30PN
720P/24PN
480i/60i
6
Using [STOP] and [PLAY] , move to the item
to be set.
RECORDING SETUP
PUSH MENU TO RETURN
TCG
TC PRESET
1394 UB REGEN
1394 TC REGEN
TC MODE
UB MODE
DV
ON
DF
REC RUN
ON
720P/60P
FRM.RATE
SD(480i/576) MODE
SYS FORMAT
7
Press [STILL] to set the item.
To change a numerical value, etc., use [FF] and
[REW] to change the setting.
8
To change other items, repeat steps 6 and 7.
To exit the settings, press [MENU] and return to
the thumbnail display off screen.
9
To change another function, repeat steps 4
to 7.
To exit the settings, press [MENU] and return to
the thumbnail display off screen.
Initializing the setting menu
You can return (initialize) the setting menu user
files to the factory status.
1
Switch the display to the thumbnail display
off screen.
2
Press [MENU].
3
Using [STOP], [PLAY] and [STILL], select
“OTHER FUNCTIONS” – “USER FILE”
– “INITIAL”.
4
Press [STILL].
The menu settings of the user files currently
being used are returned to the factory status.