Philips SVA102 - Manual (Page 18)

18 Remote Control Buttons
MENU Button
Press repeatedly to access menus or to remove menus.
SPEED Button
Press to select the recording speed (SP or SLP). Details are on
pages 24 and 40.
PLAY Button
Press to play a tape. Also, press to release Search or Still mode
and to return to normal playback. Details are on page 34. Use to
enter digits and information when programming a function in the
on-screen menu (setting the clock, for example). Press to select
an item in the on-screen menu.
REWIND Button
When tape playback is stopped, press to rewind the tape at high
speed. During tape playback, press to rewind the tape while the pic-
ture stays on the screen. Details are on page 34.
Press to erase a timer recording. Details are on page 29.
Press to add or delete channel numbers. Details are on page 13.
Press to go back one step when setting the clock or a timer recording.
RECORD Button
Press to start a recording. Details are on page 24.
DISPLAY Button
Press repeatedly to view the on-screen status displays. Details are
on page 17.
Number Buttons
Use to select channels.
Channels 1-9 ●
To select, press 0, then press the channel number you want. For
example, to select channel 7, press 0, 7.
Channels 100 and above ●
To select, press the +100 button, then press the last two digits of
the channel you want. For example, to select channel 117, press
the +100 button, 1, 7.
VCR/TV POWER EJECT
1 2 3
4 5 6
7 8 9
0 +100
CHANNEL
SPEED
RENTAL
SELECTOR
AUTO
REPEAT
CLOCK/
COUNTER
EXIT COUNTER DISPLAY MENU
RESET MEMORY
REWIND / PLAY F.FWD
RECORD PAUSE/STILL / STOP
POWER Button
Press to turn the VCR on or off.
RENTAL SELECTOR Button
Press to set the Rental mode to ON or OFF during tape playback.
Details are on page 35.