Panasonic AM1 (NZ BASIC) - Manual (Page 2)

AM1
PRODUCT TYPES
1. Standard type
2. Oil tight types
Remarks: 1. Standard part number indicates UL/C-UL mark.
2. Standard packing for inner carton: 20cps.
SPECIFICATIONS
1. Contact Rating
2. Characteristics
Actuator Solder terminal Screw terminal
Pin plunger AM1100KF AM1300KF
Over travel plunger AM1105KF AM1305KF
Compact over travel plunger AM1106KF AM1306KF
Panel mount plunger AM1107KF AM1307KF
Panel mount roller plunger AM110811KF AM130811KF
Panel mount cross roller plunger AM110812KF AM130812KF
Flexible leaf lever AM1101KF AM1301KF
Flexible roller leaf lever AM1103KF AM1303KF
Rigid lever AM1501KF AM1701KF
Rigid short roller lever AM1504KF AM1704KF
Rigid roller lever AM1503KF AM1703KF
One way type•Rigid short roller lever AM1544KF AM1744KF
One way type•Rigid roller lever AM1543KF AM1743KF
Reversed action type•Rigid lever AM1531KF AM1731KF
Reversed action type •Rigid short roller lever AM1534KF AM1734KF
Reversed action type•Rigid roller lever AM1533KF AM1733KF
Actuator Solder terminal Screw terminal
Rigid lever AM1511KF AM1711KF
Rigid short roller lever AM1514KF AM1714KF
Rigid roller lever AM1513KF AM1713KF
Type Voltage
Resistive load
(cos φ = 1)
Inductive load
(cos φ = 0.6 to 0.7)
Motor or lamp load
N.C. N.O.
Standard types
One way types
Reversed action types
125 V AC 10 A 6 A 3 A 1.5 A
250 V AC 10 A 6 A 2 A 1 A
480 V AC 1 A 0.5 A — —
125 V DC 0.5 A 0.05 A — —
250 V DC 0.25 A 0.03 A — —
Oil tight types
125 V AC 10 A 6 A 3 A 1.5 A
250 V AC 10 A 6 A 2 A 1.0 A
125 V DC 0.5 A 0.05 A — —
Item Specifications
Expected
life
Mechanical
Pin plunger types (O.T.: specified value)
Min. 2 ×10 7 (60 cpm) (at rated overtravel)
(Oil tight: Min. 1.5 ×10
6 )
Other types (O.T.: specified value)
Min. 5 ×10 6 (60 cpm) (at rated overtravel)
(Oil tight: Min. 1.5 ×10
6 )
Electrical (O.T.: Max.)
Min. 5 ×10
5 (20 cpm) (at rated load)
(Oil tight: Min. 1.5 ×10 5 )
Insulation resistance Min. 100 M Ω(at 500 V DC)
Dielectric
strength
Between open terminals 1,000 Vrms for 1 min.
Between each terminal and other exposed metal parts 2,000 Vrms for 1 min.
Between each terminal and ground 2,000 Vrms for 1 min.
Contact resistance (initial) (by voltage drop, 1 A, 6–8 V DC) Max. 50 m Ω
Vibration resistance (Pin plunger type) Single amplitude: 0.75 mm, 10 to 55 Hz (contact opening: max. 1 msec.)
Shock
resistance Pin plunger types Min. 300 m/s 2 (contact opening: max. 1 msec.)
Other types Min. 50 m/s 2 (contact opening: max. 1 msec.)
Allowable operating speed (at no load) 0.1 to 1,000 mm/sec. (at pin plunger position)
Max. operating cycle rate (at no load) 240 cpm
Ambient temperature –25 °C to +80°C (no freezing at low temperature)
Weight Approx. 20 to 55 g
All Rights Reserved © C OPYRIGHT Panasonic Electric Works Co., Ltd.