Precor Cycles Integrated LCD Screen Option none - Manual (Page 5)

Cardio Theater Integrated Bracket Assembly Instructions
page 5
Preparations
2
Important: To attach the Cardio Theater Integrated
Bracket, ask another adult for help. Do not attempt
the assembly by yourself.
Remember to read and follow the instructions in this
guide. If you do not assemble the Cardio Theater
Integrated Bracket according to these guidelines,
you could void the Precor Limited Warranty.
Required Tools
Obtain these tools before assembly:
• Standard hex key set
• Standard socket set
• ½-inch box wrench or crescent wrench
• Flat head screwdriver
• Phillips-head screwdriver
• Standard torque wrench
Installation Requirements
Review these installation requirements before
assembly:
• The Cardio Theater Integrated Bracket is built to
VESA MIS-D, 100/75 standard interface specifi-
cations.
• Provide ample space around the cycle. Open
space around the unit allows for easier access
and installation.
• Open the box and assemble components
in the sequence presented in this guide.
• Leave room for adjustments. Tighten fasteners
(bolts, nuts, and screws) so the unit is stable, but
leave room for adjustments. Do not fully tighten
fasteners until instructed in the assembly steps
to do so.
Assembly Tips
• Read all the notes on each page before
completing that step.
• While you may be able to assemble the
Cardio Theater Integrated Bracket using the
illustrations only, important safety notes and
other tips are included in the text.
The assembly of the Cardio Theater Integrated
Bracket takes about ½ hour to complete.
Preparations