Panasonic BT-LH2550P - Manual (Page 8)

8
The BT-LH2550 LCD monitor is a 25.5 inch full HD LCD display panel designed especially for broadcasting service
and business use.
■ Compact 25.5 type full HD monitor
• The monitor is equipped with a high-resolution (1920 x 1200) IPS LCD panel.
• Efforts to develop a small footprint have resulted in a surprisingly compact design for a monitor with a screen
size of 25.5 inches.
■ Wide color gamut panel and 10-bit 3D LUT for faithful color reproduction
• The wide color gamut panel increases the origin coordinate accuracy of broadcast standard RGB and 3D LUT
improves color reproduction. It is also compatible with the wide color gamut modes for the Adobe RGB and D-
Cinema standards *
1
.
*1 D-Cinema refers to D-Cinema min. Color Gamut.
■ A new image processing engine for improved video quality
• 10-bit image processing accurately and smoothly reproduces color from low to high brightness levels.
• Built-in I/P converter circuit with a delay of less than 1 field minimizes the delay between input signal to picture
display.
• Diagonal line compensation processing circuit reduces vertical image degradation and jagged noise in the
diagonal direction.
• High-speed motion response results in crisp image reproduction without blurring.
• The gamma correction of each monitor is set individually prior to shipment.
■ Multi-format image compatibility
• This monitor is equipped with SDI (HD/SD compatible), VIDEO, YP
B
P
R
/RGB, DVI-D (HDCP compatible) input jacks.
• It supports both NTSC and PAL TV broadcast systems.
■ A host of functions
• Split-screen function
You can display two selected inputs in two windows and set a separate color space and gamma value for image
comparison.
• Time code display
During HD SDI input, you can select to display VITC, LTC or UB time code.
• Closed caption
During VIDEO (NTSC) input, this feature displays the closed caption information embedded in the video signal.
(EIA-608 compliant)
• Waveform and vector display
This feature shows the waveform (for SDI, VIDEO and YP
B
P
R
inputs) and vector display (for SDI input) of input signals.
• Cross hatch overlay function
Displays markers at regular vertical and horizontal intervals to facilitate composition.
■ Calibration function
The monitor can easily be calibrated using a luminance meter.
■ REMOTE control
Depending on the intended use of the monitor, you can select between parallel remote control (GPI) and serial
remote control (RS232C).
• Adobe is the registered trademark or trademark of Adobe System Incorporated in the United States and other
countries. Other company names and product names are the trademarks or registered trademarks of their
respective owners.
Outline