Polaroid PLA 4260 - Manual (Page 14)

14
Installing the Plasma Display
Locating
• Avoid direct sunlight. Maintain adequate ventilation.
• The length of the system cable used to connect the Plasma Display and
the Set-Top Box is about 3 m (118 inches).
• Because the Plasma Display is heavy, be sure to have someone to help
you when moving it.
• Do not place anything on the top of the Media Receiver; it will not receive
enough ventilation and will not operate properly.
Note
Allow enough space around the upper and back parts when installing to ensure
ventilation around the backside of the Plasma Display.
Preparation
Connecting the cable between the PDP and the Set-Top Box:
• White connectors connect to the WHITE terminal on the Set-Top Box
and DVI terminal on the PDP.
• Black connectors connect to the BLACK terminal on the Set-Top Box and
DFP terminal on the PDP.