Panasonic NV-SJ430PMP - Manual (Page 7)

7
Before Use
Installing the Batteries
Insert the batteries with the polarity ( + and -)
correctly aligned.
Power Source for the Remote Controller:
The remote controller is powered by 2 “AA”,
“UM3” or “R6” size batteries. The life of the
batteries is about one year, although this
depends on the frequency of use.
Precautions for Battery Replacement:
≥
Load the new batteries with their polarity ( +
and -) aligned correctly.
≥ Do not apply heat to the batteries, or an
internal short circuit may occur.
≥ If you do not intend to use the remote
controller for a long period of time, remove
the batteries and store them in a cool and dry
place.
≥ Remove spent batteries immediately and
dispose of them.
≥ Do not use an old and a new battery together,
and never use an alkaline battery with a
manganese battery.
≥ Do not use rechargeable batteries.
TV OPERATION
§ Set VCR/TV switch to TV for using POWER
Í
, the
I and J buttons and the numeric
buttons.
20 AV
Selects TV input or AV input.
21
I J
Selects the required program position (TV
station) of the TV.
≥
Ensure that VCR/TV switch is set to TV.
22 VOLUME s
Nr
Adjusts the volume of the TV.
18 POWER Í
Press to switch the TV from on to standby
mode or vice versa. In standby mode, the
TV is still connected to the mains.
≥
With some TV models, it may only be
possible to switch the TV to the standby
mode using this button.
In this case, use AV or the
I and J
buttons to switch the TV on.
≥ Ensure that VCR/TV switch is set to TV.
19 Numeric Buttons
Selects program positions of the TV.
≥
Ensure that VCR/TV switch is set to TV.
19
18
20
22
21
§
Í
DIRECT REC REPEAT
VOLUME
SEARCH PICTURE MODE REC
VCR
DATE
CANCEL
AUDIO RESET OSD/DISPLAY VCR/TV
SPEED
+ +
–
+
–
ON OFF
TV
AV
+
–
MENU
OK
PROG. / CHECK TIMER
Á
NAVI INDEX
1 2 3
7 8
0
9
4 5 6
1 2 3 4
POWER
INPUT SELECT
JET REW
100
–
CH
-
-
+
+