Polaris 600 HO IQ Touring CFI - Manual (Page 52)

49
THE PERFECT FIT
Rear Suspension Adjustments
Initial Spring Preload Setting (Sag Method)
To determine sag, commonly referred to as ride-in, subtract measure-
ment Y from X (sag=X-Y). If the measured sag is incorrect, adjust the
FRA position and/or rear torsion spring preload.
NOTE: This is only an initial setup, and final spring preload may vary
based on rider preference and riding conditions.
Suspension Recommended Sag Adjustment
See
Page
IQ (121) 4-5 inches (10-13 cm) Torsion Spring
Preload
50
M-10 128
(LX)
3-4 inches (8-10 cm) FRA Position &
Rear Track Shock
Spring Preload
58
59
M-10 136
(Touring)
3-4 inches (8-10 cm) FRA Position &
Rear Track Shock
Spring Preload
58
59
SwitchBack
(144)
5 inches (13 cm)
(see note below)
Torsion Spring
Preload
55