Presto Pizzazz - Manual (Page 2)

2
Removable
Baking Pan
Heat Element Selector Switch
(LOWER–DUAL–UPPER)
Timer
Upper Heating
Element
Lower Heating
Element
Drive
Shaft
“Curl”
Cooking
Chart
“Curl”
Lower Element Tray
Fig. A
Unit
Assembled
Important Cord and Plug Information
A short power supply cord is provided to reduce the risk resulting from becoming entangled in or tripping over a longer cord. Do noT
USE WiTh An EXTEnSion CoRD.
This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit
into a polarized outlet only one way. if the plug does not fit fully in the outlet, reverse the plug. if it still does not fit, contact a qualified
electrician. Do not attempt to modify the plug in any way
Connect the power supply cord to a 120VAC electrical outlet only.
Getting Acquainted
your Pizzazz ® Plus rotating oven will cook an assortment of frozen convenience foods; it can also be used to bake cookies and cinnamon
rolls from refrigerated dough, and prepare quesadillas, grilled sandwiches, and 7- to 12-inch pizzas (frozen, take-and-bake, deli, or
homemade). no preheating is required.
The selectable heating elements (LoWER–DUAL–UPPER) let you bake a variety of foods – even cookies, cinnamon rolls, and rising
crust pizza, as well as providing you with a way to make foods the way you like them. Begin by using the recommended settings in the
cooking charts. you will find pizza on page 4 and an array of convenience foods on page 5. The pizza chart is also reproduced on the
back of the oven for easy reference.
With the open oven design, you can see the precise moment your food is done. you can also change the heat setting and time with ease.
Want a browner top, select UPPER; prefer a crispier crust, select LoWER. need to reheat for a minute or two, select DUAL and reset
the timer – if the time is short, turn timer dial beyond the “4” minute mark and then back to the desired time. The oven is fast – to avoid
overcooking, do not leave unit unattended.
Whenever the unit is plugged in, the motor will turn on and the pan will rotate if positioned correctly. once the timer is set, the heating
elements will turn on. When the time has expired, the timer will ring and the heating elements will shut off. The pan will continue to
rotate until either it is removed or the unit is unplugged.