Polaroid i-Zone Webster - Manual (Page 3)

Minimum system requirements
• PC with Pentium class processor
• Microsoft Windows 95, Windows 98
• 16 MB RAM
• 70 MB available hard drive space
• CD-ROM drive
• Serial port
• 16-bit or 24-bit display
• Mouse
To install the software:
• Insert the software CD in your CD-ROM drive. The automatic installation procedure should
start. Follow the instructions on the screen.
Note: If the installation does not start, from the Windows Start menu, select Run.
Type D:\Setup.exe at the prompt (D: is the letter of your CD-ROM drive). Click OK and
follow the instructions on the screen.
When the software is installed, see the online help for help using the product.
Once you have installed the Arcsoft PhotoImpression software, you can transfer photos to your
computer.
To connect the mini photographic scanner to the computer:
1. Connect the serial cable to the mini photographic scanner and to the serial port on your
computer.
2. Start the software: Click the Start menu, select Programs then open the Polaroid I-Zone
folder, select Arcsoft PhotoImpression.
PhotoImpression starts.
Transferring photos to your computer
Installing the software
a
3. Click Get Photo.
The Get Photo area (a) is displayed at the bottom of the screen.
4. Select Camera/Scanner and select Polaroid I-Zone Webster.
5. Click Acquire.
The Polaroid I-Zone dialog box is displayed. The image numbers are displayed.
Note: If a “Camera not found” message displays, turn off the computer and make sure the serial cable
is firmly connected. Then turn on the mini photographic scanner and turn on the computer.
6. To view thumbnail images of the photos in the mini photographic scanner, press the Refresh
Thumbnails button.
7. To select all the photos in the mini photographic scanner, click Select All or click on an individual
photo to select it.
8. Click Get Photos to download the selected photos.
Caution: Clicking Delete All Photos will delete all photos in the mini photographic scanner.