Panasonic DMC-FP8 - Manual (Page 10)

VQT2G37 (ENG)
10
Preparation
Preparation Charging the Battery
∫ About batteries that you can use with this unit
The battery that can be used with this unit is DMW-BCF10PP.
• Use the dedicated charger and battery.
• The camera has a function for distinguishing batteries which can be used safely. The dedicated
battery (DMW-BCF10PP) supports this function. The only batteries suitable for use with this
unit are genuine Panasonic products and batteries manufactured by other companies and
certified by Panasonic. (Batteries which do not support this function cannot be used).
Panasonic cannot in any way guarantee the quality, performance or safety of batteries which
have been manufactured by other companies and are not genuine Panasonic products.
• The battery is not charged when the camera is shipped. Charge the battery before use.
• Charge the battery with the charger indoors.
• Charge the battery in a temperature between 10 oC to 35 oC (50 oF to 95 oF). (The battery
temperature should also be the same.)
It has been found that counterfeit battery packs which look very similar to the
genuine product are made available to purchase in some markets. Some of these
battery packs are not adequately protected with internal protection to meet the
requirements of appropriate safety standards. There is a possibility that these
battery packs may lead to fire or explosion. Please be advised that we are not
liable for any accident or failure occurring as a result of use of a counterfeit
battery pack. To ensure that safe products are used we would recommend that a
genuine Panasonic battery pack is used.
Attach the battery with
attention to the direction of the
battery.
Connect the charger to the
electrical outlet.
• Charging starts when the [CHARGE]
indicator A lights green.
• Charging is complete when the
[CHARGE] indicator A turns off.
Detach the battery after
charging is completed.
90 
DMC-FP8~_eng.book 10 ページ ２００９年７月７日 火曜日 午後７時５６分