Palsonic PMC-211 - Manual (Page 7)

.
LISTENING TO COMPACT DISC (CD)
If a Compact Disc Player is subject to sudden vibration while playing, it may skip or mistrack. It is
therefore preferable to use the player on a flat level and stable surface.
Playing a compact disc
Press the POWER button to switch on the set. Slide the FUNCTION switch to CD position
Insert the Compact Disc with label side facing upward and close the CD tray. The LED display
will indicate the number of tracks on the disc If the disc is inserted incorrectly, the disc will not
play.
Press the CD PLAY / PAUSE button once to start the disc playing. The right bottom dot of the LED
display will light on Adjust the VOLUME control as required. To stop playing, press the CD STOP
button.
Ensure the CD is stopped before opening the CD tray or press the CD STOP button first, then
open the CD tray.
Pause
If it is desired to pause during playback, press the CD PLAY / PAUSE button once. The right
bottom dot will be flashing. Press again to return to normal.
Skip
The skip function can be used during play, or when stopped in order to skip to the start of a track on
the disc.
To skip forwards press the CD SKIP / FF. button repeatedly until the desired track is reached.
To skip to the beginning of current track, press the CD SKIP / REV. button once. To skip to the
previous tracks, press this button repeatedly until the desired track is reached.
To search for a particular passage on a track during playback
Press and hold the CD SKIP FF / REV. button, the player will search rapidly forward or backward.
Release the button when you reach the desired point on the track and normal speed playback
will resume at that point. During searching, the volume is reduced.
Program playback
To program a CD, you can play up to 16 tracks in any desired order.
1.
2.
3.
4.
5.
6.
7.
*
Place the disc to be programmed in the tray. Press the PROGRAM button once in STOP mode.
The "Pr" will light on the LED display.
Use CD SKIP FF. or SKIP REV. button to select the first track to be programmed.
When the desired track appears on the display, press the PROGRAM button again.
Repeat steps 3 and 4 to program up to 16 tracks.
Press the CD PLAY button, playback will start with the first track of the program. When
all tracks have been played, the display will show the number of tracks.
To cancel your program, press the CD STOP button twice, open the CD tray and close it
again, switch to other function except CD or change to STANDBY mode.
There is no indication for PROGRAM play.
Repeat Play
1.
2.
3.
Press the CD REPEAT button, the middle bottom dot on the LED display will be flashing. The
current sound track will play repeatedly until CD STOP button is pressed.
Press the CD REPEAT button again, the middle bottom dot on the LED display will light on. The
CD will play sequentially and repeatedly until the CD STOP button is pressed.
Press the CD REPEAT or STOP button to stop repeat function.
5