ParkerVision WLAN1500 - Manual (Page 13)

15
WLAN1500
Wireless PC LAN Card
®
3.1 System Requirements
• PCMCIA Type II slot
• PCMCIA card and socket service that is Revision 2.1-compliant to PCMCIA specifi cation
(or higher).
• Windows 2000/XP Operating System
• 500 Kbytes free hard disk space (minimum) for driver and utility program installation.
• 128 MB RAM
3.2 Installing the ParkerVision Wireless LAN Card
Follow the procedure shown next to install the ParkerVision Wireless LAN Card. Refer to the
appendix for important safety instructions.
Step 1. Locate available Type II or Type III PCMCIA slot in your notebook computer.
Step 2. With the ParkerVision Wireless LAN Card adapter’s 68-pin connector facing the
PCMCIA slot and its label side and LED’s facing up, slide the ParkerVision Wireless LAN
Card completely into the PCMCIA slot as shown next.
Never force, bend or twist the ParkerVision Wireless LAN Card into the slot
Chapter 3 :
Hardware Installation
This chapter will guide you through the installation of the ParkerVision Wireless
LAN Card into your computer