Pioneer MULTI-CD CONTROL DSP HIGH POWER CD/MD PLAYER WITH FM/AM TUNER FH-P8900MD - Manual (Page 52)

51
Additional Information
Connection Diagram
Subwoofer output or
Rear output
This Product
Multi-CD player
(sold separately)
IP-BUS cable
Subwoofer or
Rear speaker
Front speaker
Rear speaker
Left
Perform these connections when using a
different amp (sold separately).
With a 2 speaker system, do not connect
anything to the speaker leads that are not
connected to speakers.
Yellow
To terminal always supplied with power
regardless of ignition switch position.
Orange/white
To lighting switch terminal.
Red
To electric terminal controlled by
ignition switch (12 V DC) ON/OFF.
Yellow/black
If you use a cellular telephone, connect it via the Audio
Mute lead on the cellular telephone. If not, keep the
Audio Mute lead free of any connections.
Black (ground)
To vehicle (metal) body.
Fuse holder
Antenna jack
Fuse resistor
Fuse resistor
Blue
When the source is selected the tuner, a control signal is
output.
To Auto-antenna relay control terminal.
If the car features a glass antenna, connect to the antenna
booster power supply terminal (max. 300 mA 12 V DC).
Blue/white
When the source is switched ON, a
control signal is output.
To system control terminal of the power
amp (max. 300 mA 12 V DC).
IP-BUS input
(Blue)
15 cm
15 cm