Panasonic AJ-HDX900P - Manual (Page 13)

112
Chapter 7 Menu description tables
(continued)
The underlining in the variable range column indicates the setting in the preset
mode.
7-3-9 SKIN TONE DTL
Item
Variable
range
Remarks Item
Variable
range
Remarks
∫ SKIN TONE DTL OFF
A
B
AB For selecting the skin color table for enabling
the skin tone detail.
The skin color table is provided in the SKIN
TONE TABLE item.
By enabling the skin tone detail, it is possible
to shoot human skin more accurately.
∫ SKIN TONE
ZEBRA VF
ON
OFF For the setting to display the zebra pattern in
the skin tone area displayed in the
viewfinder screen.
The zebra pattern is displayed when this
item is turned “ON” and the <SKIN TONE
DTL> screen is opened.
The zebra pattern is displayed on area A or
B, which is selected in the SKIN TONE
TABLE item.
It is impossible to display both area A and B
at the same time.
SKIN DTL CORING 0
:
5
:
7
For setting the effect level of the skin tone
detail.
Y MAX 000
:
190
:
255
For setting the maximum value of brightness
for enabling the skin tone.
Y MIN 000
:
010
:
255
For setting the minimum value of brightness
for enabling the skin tone.
I CENTER 000
:
035
:
255
For setting the center position on the I axis
(for setting an area that enables skin tone.)
I WIDTH 000
:
055
:
255
For setting the area width for enabling the
skin tone on the I-axis of which the center is
the I CENTER.
Q WIDTH 00
:
10
:
90
For setting the area width for enabling the
skin tone on the Q-axis of which the center
is the I CENTER
Q PHASE –180
:
+00
:
+179
For setting phases of the area for enabling
skin tone as setting the standard to the Q-
axis.
R-Y
B-Y
Q-WIDTH
I-WIDTH
Q-PHASE
I-CENTER
Y
Y-MAX
Y-MIN
0
=SKIN TONE AREA
+ direction
– direction
S C U F R
S C U F R
∫ SKIN TONE
ZEBRA VOUT
ON
OFF For the setting to superimpose the zebra
pattern in the skin tone area output from the
VIDEO OUT connector.
O When the VIDEO OUT switch is set to the
SD SDI or VBS position, the zebra pattern
will not be superimposed.
S C U F R
∫ SKIN TONE
ZEBRA MONI
ON
OFF For the setting to superimpose the zebra
pattern in the skin tone area output from the
MON OUT connector.
S C U F R
SKIN TONE TABLE A
B For selecting the skin tone table for enabling
the skin tone details.
S C U F R
SKIN TONE GET For fetching the color information of A or B,
which is selected in the SKIN TONE TABLE
item, near the center marker.
When this function is executed, data from I
CENTER to Q PHASE are fetched
automatically.
The fetched data will be the table data of A
or B, which is selected in the SKIN TONE
TABLE item.
It is impossible to obtain color information of
both A and B at the same time.
S U F R
S C U F R
S C U F R
S C U F R
S C U F R
S C U F R
S C U F R
S C U F R
<Note>
Items with $ in front of their names are set by the PAINT
MENU SW ($) R/W menu items on the <CARD R/W
SELECT> screen.
Items without $ in front of their names are set by the PAINT
MENU LEVEL R/W menu item.
For details, refer to “7-6-2 CARD R/W SELECT.”