Using the base unit, Making calls, Base unit – Panasonic KX-TG5480 User Manual

Page 36

Advertising
background image

Making Calls

36

N

When the handset is not in use, you can also turn this feature on or off by
performing the following steps:

1. Press [MENU] while the handset is not in use.
2. Scroll to “Voice enhancer” by pressing [d] or [

B], then press the soft key

(

).

3. Select “On” or “Off” by pressing [d] or [

B].

4. Press the soft key (

), then press [OFF].

Using the Base Unit

To switch to the handset while using the base unit speakerphone:

— If the handset is off the base unit, press the line soft key (

) or (

) on

the handset, then press [SP-PHONE] on the base unit.

— If the handset is on the base unit, just lift up.

The line buttons show the status of each line (p. 37).

To adjust the speaker volume during a conversation

To increase volume, press [

B]. To decrease volume, press [d].

There are 8 volume levels. If you try to increase/decrease volume when it is at the

maximum/minimum level, the base unit beeps 3 times. The level is displayed on
the base unit.

1

Press [SP-PHONE].

The SP-PHONE indicator lights.
A free line is automatically selected

and the line button lights. (To change
the line selection, see page 63.)

You can select a line by pressing a

line button that does not light, instead
of pressing [SP-PHONE].

2

Dial a phone number.

If you misdial, press [SP-PHONE]

and start again from step 1.

3

When the other party answers, talk
into the MIC (microphone).

4

To hang up, press [SP-PHONE].

The SP-PHONE indicator and line

button lights go out.

Hands-free Digital Duplex Speakerphone

For best performance, please note the following:
Talk alternately with the other party in a quiet room.
If you or the other party has difficulty hearing, press [d] to decrease the

speaker volume.

SELECT

SAVE

Base Unit

[REDIAL/PAUSE]

LINE Buttons

[

B], [d]

[HOLD]

MIC

[SP-PHONE] and Indicator

LI NE1

LI NE2

Advertising