Polycom 2000 User Manual
Page 8
LinkPlus Interface Guide: NEC NEAX 2000 and 2400 System
PN: 1725-36138-001_E.doc
8
“model” handsets then use the model as a template to program
the other handsets.
•
All handsets are different
: All handsets are programmed differently,
so each handset will be programmed individually.
Before installation, the parameters of the wired phones should be
verified to plan the parameters required for the handsets.
Line assignment
The handset supports up to nine line resources. Which lines should
ring at this handset and which lines will be selected when the user
goes off-hook?
Line appearances
Should this extension number appear on any other telephone? On
which sets should it ring?
Coverage
Where is this handset forwarded on busy/no answer? Does it belong
to a pickup group?
Toll restrictions
Should any special restrictions be assigned for incoming or outgoing
calls?
Programmable keys
Determine which features, if any, should be programmed on the
handsets. These assignments may emulate assignments on the user's
wired set.
If possible, identify a wired set that is programmed exactly or close to
the way the handsets should be programmed. This set can be used to
copy the programming to the new handsets.