Polaroid FLM-201TM - Manual (Page 37)

37
D. Other Functions
1. CH
/
:
Under TV mode, “CH / ”
keys are for changing channels.
2. VOL +/ -
:
Under any display mode, “VOL +/ -” are for adjusting sound volume.
3. ARC (Aspect Ratio Control):
˙Full : Expands 4:3 video sources both vertically and horizontally to fill the entire screen while
keeping the original aspect ratio..
˙Normal : Sets the aspect ratio to 4:3. There will be black bars to the left and right sides of the
image.
˙Panorama : This mode expands the width of 4:3 video sources evenly to fill the 16:9 screen. There
will be distortion as all four edges of the image are stretched, creating less distortion at the center
of the screen.
˙Zoom 1: Extends the image height to fill the screen by stretching the image vertically.
˙Zoom 2
: Same as”16:9 Zoom”, but the button edge of the screen pulls up a little for the subtitle
purpose.
(In PC mode, only has Full and Normal)
4. APC (Automatic Picture Control):
Automatic Picture Control allows you to easily set the screen luminosity based upon your
environment. If in a well lit viewing area it may be necessary to turn up the screen intensity via
the APC "BRIGHT" setting to make the image viewable. Likewise if in a dark viewing area it
may be necessary to turn down the screen intensity via the APC "MOVIE" setting. Toggle the
APC button to scroll through the four APC modes to select the mode that best suits your
situation.
5. MTS (Multi-Television-Sound):
˙There are three supported MTS modes: “Mono”, “Stereo” or “SAP” (Secondary Audio
Program).
˙This LCD TV has the ability to decode stereo or SAP broadcasts.