Polycom SpectraLink 1725-36032-001 - Manual (Page 21)

Configuring the SpectraLink 8000 SVP Server
Network Configuration
The IP address and other network settings are established via the
Network Configuration screen. This is also where you may optionally
establish a hostname and enter the IP address of the location of any
software updates you may obtain from Polycom. See Chapter 5
Software Maintenance for more information about installing software
updates via TFTP.
Scroll to
Network Configuration and select by pressing Enter. A screen
similar to the following appears:
Note the navigation options at the bottom of the screen. Press Enter to
change a value, ESC to exit the screen, and the arrow keys to move
the cursor.
PN: 1725-36032-001_F.doc 21