Patton electronic 1082 - Manual (Page 7)

7
2.2 DESCRIPTION
The Model 1082/I and Model 1082/144/I are Multi Rate iDSL Modems that
provide seamless MAC Layer connectivity between 2 peered 10Base-T
LANs. Now, Enterprise users no longer need to hassle with a bridge and a
CSU/DSU or recurring leased line costs. The 1082 allows users to add addi-
tional nodes to a LAN that has reached its maximum distance limits or sepa-
rate high traffic areas of a LAN. The 1082 connects peered LANs and
automatically forwards and receives LAN broadcasts, multi-casts and
frames across a 2-wire DSL span. The Model 1082/I and Model 1082/144/I
support PPP (RFC 1s661) and BCP (RFC 1638).
Both 1082 modems’ features include loopback diagnostics, inband
SNMP/HTTP remote management capabilities using NetLink Plug-and-
Play and externally accessible configuration switches. As a symmetric
DSL modem, the1082 offers the same data rates in both directions over
a single pair of regular telephone lines using 2BIQ modulation. The 1082
connects to the DSL line via an RJ-45 jack, and is powered by a univer-
sal (90–260VAC) supply or a DC supply (-48VDC).
2.3 1082 SNMP MANAGEMENT SOLUTIONS
The Model 1082/I and Model 1082/144/I are SNMP manageable when con-
nected to a rack-mounted Model 1092ARC (see Figure 1). SNMP manage-
ment is enabled through a 1001MC rack management card located in the
Patton Electronics Rack System.
Figure 1. Typical application
HTTP/HTML Management
The 1001MC maintains HTML pages that can be viewed through a Web
browser. You can display remote statistics and configure Model 1082
parameters simply by entering the 1001MC’s IP address into the browser.
10Base-T
connection
to 1001MC
Management
Station
Rack-mounted
1092ARCs
2B1Q
connections to
remote 1082s
Model 1082
Model 1082