Pass Labs X150.5 - Manual (Page 9)

9 X150.5 Owners Manual
All figures obtained after 1 hour warmup, with regulated 120 VAC
power line. See manual notes about AC power line regulation.
Gain 30 dB
Freq. Response -3 dB at 1Hz, -3 dB at 100 kHz
Power Output 150 watts maximum @ 1% THD,
1 kHz, 8 ohms
Maximum Output Voltage plus, minus 50 volts
Maximum Output Current plus, minus 20 amps
Input Impedance 22 kohm balanced
Damping factor 250 ref 8 ohms nominal
Slew rate plus, minus 50 V/uS
Output Noise 300 uV unweighted 20-20 kHz
Balanced CMRR -60 dB @ 1 kHz (input common
mode rejection ratio)
DC offset < 100 mv differential
Power Consumption 250 watts idle, 600 watts maximum
Temperature 25 degrees C. above ambient at idle
Dimensions 19 “ W x 22” D x 7.5” H
Shipping Weight 68 lbs.
For more information please contact:
Pass Laboratories Inc.
P.O. Box 219,
24449 Foresthill Rd.,
Foresthill, CA 95631
Tel: 530.367.3690
Fax: 530.369.2193
www.passlabs.com
© 2006, Pass Laboratories Inc.
X150.5 Specifications
“Pass”, “pass”, “Pass Labs”, “Pass Laboratories”, Supersymmetery”,
“Aleph”, and “Zen” and are all registered trademarks of Pass
Laboratories, Inc., and all rights thereto are protected by law.