Peavey Sanctuary SSE 12 - Manual

SPECIFICATIONS
SSE ™ 12
Description
The SSE is a new enclosure series
featuring high power ratings with custom
components, a sleek look and a unique,
snap-in metal grille. The SSE 12 is a two-
way system featuring the highly acclaimed
Peavey 14XT titanium compression driver
with the diverse Sound Guard IV tweeter
protection network and Peavey Scorpion
Pro 1200+ 12" woofer with 2.5" (64 mm)
voice coil for smooth response. The SSE
12 is rated at 500 Watts program and 1,000
Watts peak. This lightweight speaker
system is ideal for smaller venues where
space is at a premium. Connections are
made using a four-pin Neutrik
® Speakon ®
or a paralleled two-position terminal block
for additional cabinets. The SSE 12
incorporates flying points on the top of the
unit and mounting points on the bottom
for utilizing the Peavey VersaMount 70
mounting bracket. The SSE Series is
available in black, white and natural
finishes.
Features:
• Two-way sound reinforcement
enclosure
• Designed for permanent install
• Available in three finishes: black,
white or natural
• Peavey Scorpion ® Pro 1200+ 12"
woofer with 2.5" (64 mm) voice
coil
• Peavey 14XT ™ titanium diaphragm
compression driver
• Sound Guard ™ IV tweeter
protection network
• Seven flying points (six 3/8" for
suspension and one 1/4" for angle
adjustment)
• Mounting point for VersaMount ™
70 bracket
• 13 mm birch plywood
construction
• 500 Watts program/1000 Watts
peak power handling
• 79 Hz to 17 kHz
• 98 dB at 1W/1m
• 8 Ohms
Frequency response, 1 meter on-axis,
swept-sine in anechoic environment:
79 Hz to 17 kHz (±3 dB)
Usable low frequency limit (-10 dB
point):
60 Hz
Power handling:
Full range:
500 W program
1,000 W peak
Sound pressure level, 1 Watt, 1 meter in
anechoic environment:
Full range:
98 dB SPL (2.83 V input)
Maximum sound pressure level
(1 meter):
Full range:
122 dB SPL continuous
128 dB SPL peak